Hammer crusher Application

Hammer crusher is suitable for mid-hard and light erosive Materials(Giallo), whose pressure
resistance strength is no more than 100Mpa and humidity lower than 15%, suchas coal, salt, chalk, gypsum, blocks, limeStone(Cafe Imperial), etc.

Hammer crusher Operating Principle

The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw Materials(Giallo) enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammerto small size. There is a screening plate under the rotor, so that Materials(Giallo) with size smaller than the screen mesh will be screened out and others are left tobe further hammered and ground until reach the standard size. The size of the final
product can be adjusted by changing the screening plate. The gap between therotors and the screening plate can also be adjusted according to different requirement.
 

Hammer crusher Specification

Model	Input size (mm)	Output size (mm)	Capacity(t/h)	Power(Kw)	Weight(t)
PC 400×300	100	15	5-10	11	0.8
PC 600×400	220	15	10-25	22	1.5
PC 800×600	350	15	20-50	55	4.7
PC 800×1000	400	15	20-75	110	7.9

This specification is just for reference, any changes are subject to the products.